2013年12月19日星期四

Kaolin crushing processing production line equipment

Kaolin Crusher for cement, chemical, electric power, metallurgy and other industrial sectors crushing medium hardness materials, such as limestone, slag, coke, coal and other materials in the debris, crushing operations.
Kaolin crusher for crushing all kinds of hard and abrasive weak materials. The compressive strength of the material does not exceed 100 MPa, moisture content less than 15%. Material to be broken coal, salt, chalk, gypsum, brick, limestone and so on. Also used for crushing fiber structure, strong flexibility and toughness of broken wood, paper or broken asbestos cement waste to recover asbestos fibers and so on.

In addition, not only can be used for kaolin crusher crushing production line, sand production line, but also in mineral processing production line replacement Cone Crusher. Hammer crusher main working parts with a hammer (also known as the hammer) of the rotor. Rotor from the spindle, disk, pin and hammer.
superfine2
Motor drives the rotor rotating at high speed in the crushing cavity. Material from the upper mouth to feed into the machine, by the high velocity of the hammer blow, impact, shear, abrasive and Grinding. The lower part of the rotor, with sieve, mesh size is less than crushing the grain discharged through the sieve, sieve size larger than the coarse sieve retention continue to be a hammer blow and grinding, and finally through the sieve from the plane.
Calcium carbonate2
Kaolin crusher is the maximum particle size of 600-1800 directly to the material crushed to 25 mm or 25 mm below a broken crusher.

Related Articles Recommended for you

没有评论:

发表评论